Embroidered patches can be dated all the way back to ancient Asian civilizations; they’ve been around for years and years. Yet not until recently has it been possible to place them to your clothing using a hot iron and heat-activated glue. With today’s patches it is possible to readily apply them of all fabrics without ever needing a needle and thread. Thankfully having the ability to affix them with a hot iron implies that the fingers are not going to get sore and it is easier and quicker to do. The only issue is, you can’t iron patches to leather – at least in the traditional sense.

When you’re employing a hot iron to install embroidered patches you’re essentially heating up the glue on the back side till it reaches a semi liquid, tacky state. That needs a lot of heat; heat that can harm the sensitive finish of leather.

Martial Arts Patches

It’s true that leather is an extremely durable material, nevertheless the surface is comfortably damaged by concentrated heat sources. This presents two problems. The very first problem is the fact if the leather is damaged, the glue are not likely to stay with it and therefore the patch will fall off. So when the patch does fall off, the leather will likely be left with the ugly mark where the iron has burned it. The same can probably be said for vinyl and various types of faux leather. One more thing to consider is the fact even when you might find a way to have the glue adhere, one slip from the iron that brings in contact with bare leather will leave a burn mark. For this reason you ought to have never a hot iron anywhere near your leather.

We said earlier that you simply can’t use an iron to place embroidered patches to leather in the traditional sense. The explanation for saying this is because that although you must not make an effort to place iron on patches to leather within the traditional way but there’s a non-traditional method. Therefore there is special glue that can be used together with an unheated iron. Yes, a smeynb iron. It will only be important to apply your iron being a press.

To get this to function properly, you will have to have special glue; leather is notoriously difficult to do business with so you won’t be able to use just any old glue. You will find this specialized glue at craft stores, sewing shops, as well as some high-end leather goods specialty stores. Just be certain you carefully read the directions on the bottle, ensuring that use on leather products is specifically mentioned. Failure to achieve this could suggest that you’re just going to be squandering your money.

The glue must be placed on the rear of the patch according to the instructions on the bottle and you then should carefully put the patch to the area of the leather where you need it. Next thing you need to do is make use of cold iron to press down firmly on the patch for the amount of time as mentioned on the glue bottle. You may then release the iron and wait for the glue to dry. It’s essential that you know where you need to have your patch before you lay it down. You will end up left with the ugly stain in the event you eliminate the patch after you could have placed it to the leather.

Custom Military Patches – Why Is This Critical..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.