The whole reason for having Torque Transducer is to be able to weigh your loads sufficiently and accurately, so when they are not giving us the accuracy that we expect, it leaves us wondering just what could be affecting the accuracy of our equipment. Well, there are a number of reasons as to why your load cell & torque sensors are not providing the high level of accuracy that you would expect, with each of them being shown below.

The Precision from the Load Cell & Torque Sensors – The first thing you need to be doing when you are chasing accurate weighing accuracy would be to decide on a top quality load cell & torque sensors manufacturer. While all manufacturers will proclaim that the products offer high degrees of accuracy, merely the top brands will usually have the capacity to deliver the best accuracy.

A great load cell and its torque sensors will normally have good response times (how rapidly they offer an exact reading), will not react to much to temperature alterations in the surroundings, will not suffer with creep (a modification of the reading after 2-3 minutes for being stationary), and can have very low ‘nonrepeatability’ (differences in the readings for the very same load after repeated loadings).

Factors using the Load – The precision of a load cell & indicator reading may be impacted by how the load is put on the weighing system. To ensure an exact reading, the burden needs to be put on each cell properly so when specified through the manufacturer.

When a load has become applied poorly, including the load being twisted, the cell and weighing system will simply throw up inaccurate results. To make sure complete accuracy when weighing, the load needs to be placed in such a way which are supporting all the weight proportionally.

Outside Forces – One other reason as to why accuracy might be affected on Button Load Cell is definitely the many outside forces that could be slightly altering the weight force. Wind, shock loading, vibration, and alterations in temperature can all provide an effect on the true accuracy of any reading.

A cross-wind can have an effect the load feels lighter than it actually is while shock is the process of wearing more load weight compared to what the weight capacity in the cells are. Vibrations from other nearby machines could also omqzxd fluctuations in a weight whilst temperature alterations in environmental surroundings may cause materials within the load either to expand or contract.

Signal Interference – The ultimate method by which the precision of the weight of a load might be affected is thru interference with all the signal transmission. The burden cell electrical signal may be suffer with interference from radio frequencies, electromechanical interference, and also moisture in the air can cause interference for the electrical signal.

Summary – So to guarantee that 3 Axis Force Sensor are as accurate as possible; you should be well aware of exactly what could affect that accuracy and set measures set up to avoid those occurrences from happening. Simply employ the most effective manufacturers of load cells & torque sensors leading brands, load them correctly, ensure that outside forces are limited, and this there is very little probability of signal interference.

Miniature Load Cell – Find Out More..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.